AT&T CL81114 - Change a One-To-One PTT Call to an Intercom Call; Answer an Incoming Call During a PTT Call

Multiple handset use
40
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your handset shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows Intercom.
2. Press
MENU/SELECT. Your handset displays Calling other
handset or Calling HANDSET X. The destination handset briefly
shows Push to talk Ended, and then Other handset is calling
or HANDSET X is calling. The destination handset rings.
3. Press
PHONE/FLASH or any dialing keys (or any dialing keys (0-9,
#
or
TONE ) on the destination handset to answer the intercom call.on the destination handset to answer the intercom call.to answer the intercom call.
Both handsets now show Intercom.
4. To end the intercom call, press
OFF/CANCEL on your handseton your handset
or place the handset in the telephone base or charger. Both
screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
During a one-to-one PTT, press
PHONE/FLASH on the initiating
or destination handset. The PTT call ends automatically and the
outside call is answered.
During a one-to-group PTT call, press
PHONE/FLASH on the
initiating handset. The PTT call ends automatically and the
outside call is answered.
During a one-to-group PTT call, press
PHONE/FLASH on any
one of the destination handsets. That handset answers the
outside call. The PTT call continues for the rest of the
PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL. The telephone continues to ring.
•
•
•
•