33
Intercom
Use the intercom feature for conversations between two
handsets, or a handset and a cordless headset/speakerphone
(sold separately). You can purchase expansion handsets (model
AT&T CL80114) for this telephone base to expand your telephone
system (up to 12 handsets).
Using a handset to initiate intercom calls:
1. Press MENU/
SELECT in idle mode to enter the
main menu. Press TCID or SDIR to scroll to
Intercom, then press
MENU/SELECT.
If you have a two-handset system, and no
other registered devices, your originating
handset screen shows shows Calling other
handset.
If you have more than two handsets and/or
cordless headset(s)/speakerphone(s), your
originating handset screen shows shows
INTERCOM TO:. Use the dialing keys to
enter a specific handset number (1-9 for
handsets 1-9, TONE
followed by 0-2 for
handsets 10-12, or TONE
followed by
#
for
all handsets), or presspress TCID or SDIR to scroll
to the desired handset and press MENU/SELECT. Your handset
screen shows Calling HANDSET X, or Calling all handsets.
The destination handset(s) rings and shows HANDSET X is calling
or HANDSET X is calling all (HANDSET represents the handset
name, X represents the handset number).
2. To answer the intercom call, press PHONE/FLASH,
/SPEAKERSPEAKER or any dialing key (0-9, TONE , or
#
) on the called
device. Both handsets now show Intercom.
3. To end the intercom call, one party pressesTo end the intercom call, one party presses OFF/CANCEL, or
place the handset back in the telephone base or charger. The.The The
other party hears four beeps. Both handsets display
Intercom ended.
•
•
Calling
HANDSET X
HANDSET X
is calling
Intercom
11:35
AM
12/02
Multiple handset use
To Next Page
Loading...
