Telephone operation
23
Options while on calls
Blind transfer
While on an outside call, you can transfer the call to a specific
device or any device without notifying them.
To transfer an outside call directly without notifying the
desired device:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose Transfer.
If you have a two-handset system and no other registered
devices, the outside call is put on hold and your handset shows
Transferring call... The other handset rings and shows
Transfer from other handset.
If you have other registered device(s) or more than two
handsets, your screen shows TRANSFER TO:. Use the dialing
keys to eenter a specific device number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets 10-12, or TONE
followed by # for all devices), or presspress qCID or pDIR to
scroll to the desired device and press MENU/SELECT. The
outside call is put on hold and your handset screen shows
Transferring call... or Transferring call to all.... The other
device rings and shows Transfer from HANDSET X
(HANDSET represents the handset name, X represents the
handset number).
3. To answer the call on the destination handset, press, press
, /SPEAKERSPEAKER, or any dialing key (0-9, TONE
or #). The initiating handset shows Call transferred and goes to
idle mode.
•
•
To Next Page
Loading...
Need help?
General
