54
Adding and registering handsets/headsets/
speakerphones
Your telephone can support up to 12 DECT 6.0 cordless handsets,
headsets or speakerphones. You can purchase additional handsets
(AT&T model CL80115, sold separately) or up to 10 cordless
handsets and two cordless headsets or speakerphones (sold
separately). Visit www.telephones.att.com/accessories for
a list of compatible DECT 6.0 cordless headsets or speakerphones.
Each new handset, headset or speakerphone must be registered to the
telephone base before use. You must register each handset, headset or
speakerphone separately.
To register a cordless headset or speakerphone to this telephone
system, please refer to the corresponding user’s manual for details.
To register a cordless handset, see below.
The handsets provided within your product box are already
registered as HANDSET 1, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered (up to
HANDSET 12).
Register a handset to the telephone base
1. Before you begin registration, make sure the handset is out
of the telephone base or charger and shows To register HS,
see manual.
2. Put the handset you wish to register on the telephone
base cradle.
3. The handset shows Registering... Please wait and the IN USE
light on the telephone base turns on. HANDSET X Registered
appears on the handset screen. The handset beeps and the
IN USE light turns off. The handset is now registered with the
telephone base.
Appendix
54
To Next Page
Loading...
Need help?
General
