Answering system
42
Answering system settings
Voice guide
This feature is an alternative way for you to do the basic setup of
the answering system. You can follow the voice guide to record
your own announcement, set the number of rings, and set the
message alert tone.
This feature is only available on the cordless handset.
Press MENU/SELECT on the handset when it is not in use.
Press qCID or pDIR to scroll to Answering sys, then press
MENU/SELECT.
Press qCID or pDIR to scroll to Voice guide, then press
MENU/SELECT. You hear a voice prompt “Hello! This voice guide
will assist you with the basic setup of your answering system.“
Setup your answering system by inputting the designated
numbers as instructed in the voice guide.
NOTES:
You can press
CANCEL/OFF to quit the voice guide at anytime.
After a power outage, the handset prompts you to set the date and time. After
the date and time setting is done or skipped, the handset prompts if you want
to set up the answering system via Voice guide. Press MENU/SELECT to start
the setup.
1.
2.
3.
4.
•
•
To Next Page
Loading...
Need help?
General
