Answering system
41
Answering system settings
5. PressPress MENU/SELECT again to confirm. The screen shows
Annc. reset to default.
When your announcement is reset, the system answers calls with
the default announcement described on this page. You cannot
delete the default announcement.
Answer on/off
By default, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so,
the answering system does not answer calls and record messages.
To turn the answering system on or off:
Using a cordless handset:
1. When the handset is in idle mode,
press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to
Answering sys, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to
Answer ON/OFF, then press
MENU/SELECT.
4. Press qCID or pDIR to choose On or Off, then press
MENU/SELECT to save the setting. You hear a confirmation tone.
When the answering system is on, the handset shows ANS ON.
Using the telephone base:
Press /ANS ON/OFF to turn the answering system on or off. If
the answering system is turned on, it announces, “Calls will be
answered.” If the answering system is turned off, it announces,
“Calls will not be answered.”
To Next Page
Loading...
Need help?
General
