Directory
Speed dial
The telephone system has nine speed dial locations (2-9, 0) and a
voicemail access location 1 where you can store the telephone
numbers you wish to dial more quickly. You can store up to
30 digits in each location. Speed dial assignments can only be
selected from the existing directory entries. The voicemail access
number must be manually entered. In the directory, speed dial
locations are indicated by their number on the bottom of
the screen.
Assign a speed dial number
When the telephone is idle, press MENU/SELECT.
Press qCID or pDIR to scroll to Directory. Press MENU/SELECT.
Press qCID or pDIR to scroll to Speed dial. Press MENU/SELECT.
Press qCID or pDIR to choose your desired speed dial location
(0 or 2-9), then press MENU/SELECT. The screen briefly shows
Copy from Directory... and then displays the directory list.
Press qCID or pDIR to scroll to the phone number you wish to
assign to the selected speed dial location.
Press MENU/SELECT to save the setting and return to the
previous menu.
Assign your voicemail speed dial number
To assign your voicemail speed dial number to location 1, see
page 14.
Make a call using speed dial
When in idle mode, press and hold the dialing key (0 or 2-9)
corresponding to the assigned location you wish to call.
Check your voicemail using speed dial
When in idle mode, press and hold 1 to dial the voicemail
number you have set. See page 14 to set your voicemail speed
dial number.
1.
2.
3.
4.
5.
6.
32
To Next Page
Loading...
Need help?
General
