Call block
36
Call block
If you have subscribed to caller ID service, you can use the call
block feature to reject certain calls automatically. The call block list
stores up to 20 entries. Automatic call rejection can be applied to:
Numbers saved into the call block list
Incoming calls without numbers
This feature is only available on the cordless handset.
Add a call block entry
Press MENU/SELECT on the handset when it is not in use.
Press qCID or pDIR to scroll to Call block, then press
MENU/SELECT.
Press MENU/SELECT to choose Block list.
Press qCID or pDIR to scroll to Add new entry, then press
MENU/SELECT.
When the screen displays ENTER NUMBER, use the dialing keys
to enter a telephone number (up to 30 digits).
Press qCID or pDIR to move the cursor to the left or right.
Press MUTE/DELETE on the handset to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second dialing
pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE,
then press qCID, pDIR or REDIAL/PAUSE repeatedly to find the
desired number. Press MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
•
•
1.
2.
3.
4.
5.
•
•
•
•
To Next Page
Loading...
Need help?
General
