24
Intercom
Use the intercom feature for conversations between two handsets, a
handset and a cordless headset/speakerphone (sold separately). You
can purchase expansion handsets (AT&T model CL80115), cordless
headsets and speakerphones (AT&T model TL80133) for this telephone
base to expand your telephone system (up to 12 handsets, cordless
headsets or speakerphones).
Using a handset to initiate intercom calls:
1. Press MENU/SELECT in idle mode to enter the main menu. Press
qCID or pDIR to scroll to Intercom, then press MENU/SELECT.
If you have a two-handset system and no other registered
devices, the handset shows Calling other handset.
If you have more than two handsets and/or cordless headset(s)/
speakerphone(s), the handset shows INTERCOM TO: Use
the dialing keys to eenter a specific device number (1-9 for
handsets 1-9, TONE followed by 0-2 for handsets 10-12,
#
for a single headset/speakerphone,
#
followed by 1 or 2 for
headset/speakerphone 1 or 2, or TONE followed by
#
for all
devices), or presspress qCID or pDIR to scroll to the desired device
and press MENU/SELECT. Your handset screen shows Calling
HANDSET X, or Calling all devices.
The destination handset(s) rings and shows Other handset is
calling, HANDSET X is calling or HANDSET X is calling all
(HANDSET represents the handset name, X represents the
handset number).
2. To answer the intercom call, press , /SPEAKERSPEAKER
or any dialing key (0-9, TONE , or
#
) on the called handset.
Both handsets now show Intercom.
3. To end the intercom call, one party presses , or
places the handset back in the telephone base or charger. The The
other party hears four beeps. Both devices display
Intercom ended.
•
•
Multiple handset use
24
To Next Page
Loading...
Need help?
General
