AT&T CL82309 - AT&T DECT 6.0 - Create Directory Entries; To Create a New Directory Entry

Directory
29
Create directory entries
To create a new directory entry
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Press TCID or DIRS to scroll to >DIRECTORY, then
press
MENU/SELECT.
3. Press TCID or DIRS to highlight STORE.
4. Press
MENU/SELECT.
5. Enter the telephone number when prompted.
• Use the dial pad to enter up to 30 digits.
– Press TCID or DIRS to move the cursor to the
left or right.
– Press
MUTE/DELETE to erase digits.
– Press and hold
MUTE/DELETE to erase all digits.
– Press and hold
REDIAL/PAUSE to enter a three-
second dialing pause.
-OR-
• Copy a number from the redial list by pressing
REDIAL/
PAUSE then press TCID or DIRS, or
pressing REDIAL/
PAUSE repeatedly to locate the
number to copy. Press
MENU/SELECT to copy the
number.
6. Press
MENU/SELECT to save the number in the display.
The display shows ALREADY SAVED if the number is already in the directory.
You cannot save the same number twice.
NOTE: Each line can hold 11 digits, so if you enter a number longer than 11 digits, the
top line shows the entire number.
DBMM!MPH
> EJSFDUPSZ
TUPSF
> SFWJFX
999.994.3556`
FOUFS!OVNCFS
SFWJFX
> TUPSF