Caller ID
37
Caller ID history
Dial a call log entry
1. When in the call log, press TCID or DIRS to browse.
2. Press PHONE/
FLASH or SPEAKER to dial the entry.
Delete entries
• Press
MUTE/DELETE to delete the shown entry from the caller ID history.
• When an entry from the caller ID history is shown, press and hold
MUTE/DELETE to delete all entries from the caller ID history. When the
screen shows DELETE ALL CALLS? press
MENU/SELECT to clear the caller
ID history of all entries, or press OFF/
CLEAR to exit and leave all
entries in the caller ID history intact.
Save a call log entry to the directory
1. When in the call log, press TCID or DIRS to browse.
2. Press
MENU/SELECT to select an entry. The screen displays EDIT NUMBER.
3. Use the dialing keys to edit the number.
• Press
MUTE/REMOVE to backspace and erase a digit.
• Press and hold
MUTE/REMOVE to erase the entire entry.
• Press TCID or DIRS to move the cursor to the left or right.
• Press and hold
REDIAL/PAUSE to insert a dialing pause (p appears).
• Copy a number from the redial list by pressing REDIAL/
PAUSE and
then TCID, DIRS or REDIAL/
PAUSE to select a number. Press
MENU/SELECT to copy the number.
4. Press
MENU/SELECT to move to the name. The screen displays EDIT NAME.
• Use the dialing keys (page 30) to edit the name using the method
explained in step 3 above. Press # to insert a space.
5. Press
MENU/SELECT when done and the handset shows SAVED.
• If the entry is already saved in the directory, the handset shows
ALREADY SAVED.
• If there is no caller ID information, the handset shows UNABLE TO
SAVE.
NOTES:
1. You might need to change how a caller ID number is dialed if the entry does not
appear in the correct format. Caller ID numbers might appear with an area code that
might not be necessary for local calls, or without a 1 that might be necessary for
long distance calls (page 36).
2. If neither the name nor number is available, UNABLE TO SAVE appears.
To Next Page
Loading...
