98
Smart call blocker
Call block settings
Star name list
There are many organizations like schools, medical offices, and
pharmacies that use robocalls to communicate important information
to you. Robocall uses an autodialer to deliver pre-recorded messages. By
entering the name of the organizations into the star name list, it ensures
these calls will ring through when you only know the caller names but not
their numbers.
If the first 15 characters of the incoming caller ID’s name match a name
saved in your star name list, the call will get through and ring. The star
name list stores up to 10 names.
Add a star name entry:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when it is not in use. Press
qCID or pDIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Star name list, and then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Add new entry, then press MENU/SELECT.
4. When the screen displays ENTER NAME, use the dialing
keys to enter a name (up to 15 characters). Press a key
repeatedly until the desired character appears. The rst
character of every word is capitalized.
f Press qCID or pDIR to move the cursor to the le or
right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
5. Press MENU/SELECT to store your star name entry. The display shows
Name already saved if the name is already in the star name list. You
cannot save the same name twice.
ENTER NAME
Bayriver Eleme_
To Next Page
Loading...
Need help?
General
