AT&T CL83217 - Wall-Mount to Tabletop; Installation

16
Getting started
3. Unplug the telephone line cord or the DSL lter from the telephone wall
jack. Push the telephone base up and away from the wall-mount bracket
to detach it from the wall-mount bracket.
Installation options
Wall-mount to tabletop installation
1. Unplug the large end of the power adapter from the electrical outlet.
2. If the telephone line cord and power adapter cord are bundled, untie
them rst. Slide the wall-mount bracket up and remove it from the wall-
mounting plate.
4. See Telephone base and charger installation on page 10.