AT&T CL83217 - Screen Calls Without Numbers; Send Call to Answering System; End Call

111
Smart call blocker
Screen calls without numbers
Send call to answering system
1. When the telephone starts ringing, and the screen displays
Screened call, press or /SPEAKER to
pick up the call. If you have turned on the caller ID announce
feature, the telephone announces “You have a call from...”
and the caller’s name. Aer you picked up the call, the
telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these
options, press *”.
2. Press 4 to send the caller to the answering system.
Notes:
f The caller is sent to the answering system and can leave a message even if the answering
system is o.
f To turn on or o caller ID announce, see page 21 and page 32.
f When the telephone is ringing, you can press OFF/CANCEL to mute the ringer temporarily.
End call
1. When the telephone starts ringing, and the screen displays
Screened call, press or /SPEAKER to
pick up the call. If you have turned on the caller ID feature,
the telephone announces “You have a call from...” and the
caller’s name. Aer you picked up the call, the telephone
announces “To answer the call, press 1. To send this call to the
answering system, press 4. To repeat these options, press *”.
2. If you do not want to take the call, press to
end the call.
To screen call,
press [SELECT]
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON
Screened call
PRIVATE CALLER
10/15
10:01
AM
Screened call
PRIVATE CALLER
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON