103
Smart call blocker
Call block settings
Record your name for all screening announcements:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when it is not in use. Press
qCID or pDIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press MENU/SELECT to select Rec your name. The system announces,
“Record after the tone. Press 5 when you are done.”
4. Speak towards it to record your name. Press 5 to end recording.
To listen to the announcement with your recorded name again, scroll to Play
annc and press MENU/SELECT.
Reset all your screening announcements:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when it is
not in use. Press qCID or pDIR to scroll to Smart call blk,
then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to Reset annc, then press
MENU/SELECT. The screen shows Reset to default annc?.
Press MENU/SELECT again to conrm. The screen shows
Annc. reset to default before returning to the previous
menu.
-OR-
While an announcement is playing, press MUTE/DELETE. The screen shows
Annc. Deleted before returning to the previous menu.
Your name will be deleted from all the screening announcements, and the
telephone will use the default screening announcements described on page
101.
Uncategorized
>Screening annc
Play annc
>Reset annc
To Next Page
Loading...
Need help?
General
