Appendix
Screen display messages
Screen messages
Rec mem low
The system recording time is low.
Recording message
The telephone is recording a message.
Registering...
Please wait
The handset is registering to the telephone base.
Registration
slots are full
The telephone base has the maximum of 12 handsets
registered to it.
Registration Failed
The handset registration is not successful.
Ringer off
The ringer is turned o.
Ringer muted
The ringer is o temporarily while the device is ringing.
Saved to directory
An entry has been successfully saved to the directory.
Screened call
The Smart call blocker feature of the telephone has screened a
call and is putting the call through to you.
Setting up
Answering sys...
The telephone base is playing voice guide to set up the
answering system.
Smart call blk
screening
The telephone is screening an incoming call.
Speaker
The handset or telephone base speakerphone is in use.
Voice guide set
Smart call blk?
Aer you install your telephone or power returns following a
power outage, the handset and telephone base will prompt
you to set the date and time. Aer the date and time setting
is done or skipped, the telephone base will then prompt if you
want to set up the Smart call blocker feature via voice guide.
TRANSFER TO:
You have started transferring a call, and need to enter the
desired device number or choose all devices.
To register HS,
see manual.
Screen display before handset registration.
To screen call,
press [SELECT]
Press MENU/SELECT to activate call screening.
Unable to call.
Line in use
Failed phone call (the telephone line is in use).
Unable to call.
Try again
You try to join a call when there are already four handsets on that call.
You try to make an outside call when another device is
transferring a call with the intercom feature.
XX Missed calls
There are new calls in the caller ID log.
XX New messages
There are new messages in the answering system.
147
To Next Page
Loading...
Need help?
General
