89
Smart call blocker
Call block settings
6. When the screen displays ENTER NAME, use the dialing keys to enter
a name (up to 15 characters). Press a key repeatedly until the desired
character appears. The rst character of every word is capitalized.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to store your block entry.
Notes:
f Numbers saved in your directory can also be saved to the block list.
f If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.
Review block list:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when it is not
in use. Press qCID or pDIR to scroll to Smart call blk, then
press MENU/SELECT.
2. Press qCID or pDIR to scroll to Block list, and then press
MENU/SELECT.
3. Press MENU/SELECT to choose Review.
4. Press qCID or pDIR to browse through the block entries.
Note: Block list is empty appears if there are no block entries.
>Review
Add new entry
Salesman
888-883-2445
To Next Page
Loading...
