CONSIDERATIONS
In order to use any one of these five one-touch dialing features, you must
program it onto an available button on your voice terminal.
ADMINISTRATION
None
PROGRAMMING
If you want to use any of the five One-Touch Dialing features, you must
program them onto your voice terminal. For programming procedures for each
of the features, see their separate entries in this section.
HOW TO USE
When you want to use one of the five one-touch dialing features, merely
touch the button.
On-Hook Dialing
CONSIDERATIONS
Instead of using your handset to listen while you place a call, you may want to
use your voice terminal's built-in speaker.
When instructions in this guide tell you to lift your handset before dialing,
you may choose to leave your handset on-hook and use the speaker instead.
ADMINISTRATION
PROGRAMMING
HOW TO USE
If you have a 34-button Built-In Speakerphone (BIS) voice terminal, you can
use your speakerphone to dial a call and speak with people hands-free.
None
None
To use the speaker while you place a call:
1
Without lifting your handset, touch Speaker.
2 Dial the number.
3
When you hear the other person answer, lift your handset to speak.
The speaker goes off automatically.
If you have a 34-button BIS voice terminal, you do not need to lift your
handset. When the person answers, begin speaking.
MERLIN Plus System Features
5-49
To Next Page
Loading...
Need help?
General
