4
Repeat steps 2 and 3 for each line button you want to program.
5
When you are finished programming, slide the T/P switch to the center
position.
HOW TO USE
Even if you program the lines on your voice terminal not to ring, you can tell
if a call comes in for you because the green light next to the line button still
flashes. To answer the call:
1 Touch the line button next to the flashing green light.
2
Lift your handset.
Saved Number Redial
DESCRIPTION
If you have programmed a Saved Number Redial button, you can use the
button to save an important number for one-touch dialing at a later time. If
the number you call is busy or no one answers, or if you need to call the
person back, you can save that number by touching Saved Number before you
hang up. Later, when you touch Saved Number again, your voice terminal
automatically redials the number you have saved.
CONSIDERATIONS
You can program more than one Saved Number Redid button for your voice
terminal, so that, if necessary, you can save several calls during the day. Be
sure to write on a separate sheet of paper the identity of each caller and/or
telephone number for each Saved Number button.
You may prefer to use a dial code rather than program a button in order to use
the Saved Number Redial feature.
A Saved Number Redial button saves only manually dialed numbers; it does
not save numbers dialed with an Outside Auto Dial button.
ADMINISTRATION
None
MERLIN Plus System Features
5-61
To Next Page
Loading...
Need help?
General
