ATT-WI-XXXX
URL: http//att.wirelessinternet
Login: attadmin
Use the following information to connect
to the Internet:
STEP 1: Set Up Your Device
Install the Backup Battery
1. Remove the bottom of the device by pushing the entire cover in the direction
of the arrow.
2. Insert the backup battery.
3. Replace the cover.
NOTES:
• The backup battery is intended for backup purposes only and may take
approximately three (3) hours to fully charge.
• Charge time may be impacted by environmental factors; the backup
battery will stop charging when the ambient temperature is outside of the
temperature range allowed for charging: 32°F (0°C) - 131°F (55°C).
5
A
Ports
Battery
To Next Page
Loading...
