AT&T MicroCell - Requirements; AT&T Equipment and SIM; Internet Service Requirements; Coverage Area and Account

AT&T MicroCell User Guide | Getting Started
4
Getting to Know your Device
Requirements
To use the AT&T MicroCell™, you will need:
• Fixed broadband Internet service such as DSL, fi ber, or cable.
For best performance, download speeds of at least 1.5 Mbps
and upload speeds of at least 256 Kbps are recommended.
Not compatible with satellite and mobile broadband.
• A dedicated Ethernet port available on your modem or router.
• Computer with Internet access to activate your device.
• Device must be able to access a Global Positioning System
(GPS) signal to verify the device location. Installation near a
window is strongly recommended.
• AT&T 3G, 4G, or 4G LTE wireless handset.
• Post paid wireless plan from AT&T
Package Contents
• AT&T MicroCell™
• Yellow Ethernet
cable
• AC power adapter
• Quick Start
• User Guide
STATUS INDICATORS
Your MicroCell uses indicator lights on the
front of the device to show service status.
DEVICE CONNECTIONS
Color coded connection ports are located
on the back of the device.
Ethernet
Power
Power
Ethernet
GPS
Network