TCI Library www.telephonecollectors.info
AT&T Private Pay Phone Plus February, 1988
8 Enclosure Choice
The AT&T Private Pay Phone Plus may be mounted onto a wall with or without a backboard.
The mounting surface must be a vertical surface with enough strength to provide secure
fastening of the phone. The phone may also be mounted with one of the following
enclosures, available from AT&T:
• Econo Shelf (KS-22235) (use indoors only)
• The Silencer (KS-22642) (use indoors or outdoors)
• The Sentry 22 (KS-23222) (use indoors or outdoors)
• The Sentry 23 (KS-23223) (use indoors or outdoors)
Your AT&T representative can help you decide what enclosure best suits the installation of
your phone. For more specific enclosure information, see page 18.
C. Pre-Installation Assembly
We strongly recommend that you assemble and power-up your phone before installation.
Parts Checklist
Following is a list of the parts you should have in your telephone package. On the next page
are pictures of the parts to help you identify them. Make a check in the box that follows the
listing of the part as you find that part. Some items are packed inside the telephone coin
box Those items are listed on page 10 with the instructions for removing the coin box
1. One
Owner's Manual (this book)
□
2. One coin telephone set
□
3. Instruction card sheet and two covers
□
4. One telephone number card and cover
□
5. One T-Key (Do not insert keys into any locks until you are instructed to do so)
□
6. Two coin vault door lock keys (Do not insert keys into any locks until you are instructed
to do
so)
□
7. Two front housing lock keys (Do not insert keys into any locks until you are instructed to
do
so)
□
Now turn to page 10.
Owner Manual Page 8
To Next Page
Loading...
