TCI Library www.telephonecollectors.info
AT&T Private Pay Phone Plus
February, 1988
B Diagnostics (Alarms)
At the initial display (time/date), press the "START /STOP" button. Enter your security code
and press the "ENTER" button. Alternating choices of on-site features will be displayed.
Press 4 on the internal keyboard to access alarm information.
Remember, the telephone cannot be used to make calls when in the mode to access on-site
features. Be sure you press the "START /STOP" button to exit access to on-site features so
that the phone is again ready for use by your customers.
On-Hook Alarm
Press "2"_for the On-Hook Alarm information. The display will show the number of days the
handset (receiver) has been on the hook (cradle) without being picked up. If you removed
the handset while taking off the front cover of the phone, the display will show 0.
Press the "CHANGE MENU" button to access more on-site information. Press the
"START /STOP" button to exit.
Answer Detect Alarm
Press "3" for the Answer Detect Alarm information. The display will show the state of
answer detect.
Press the "CHANGE MENU" button to access more on-site information. Press the
"START /STOP" button to exit.
Insufficient Deposit Alarm
Press "4." The display will show the number of consecutive times customers have tried to
place a call but were unable to deposit enough coinage for the call. The information could
indicate a coin jam or other kind of blockage.
Press the "CHANGE MENU" button to access more on-site information. Press the
"START /STOP" button to exit.
Owner Manual
Page 56
To Next Page
Loading...
