TCI Library www.telephonecollectors.info
AT&T Private Pay Phone Plus February, 1988
3. Attach the hose retainer to the metal hose of the handset cord, sliding the crimp at the
end of the hose into the hose retainer slot.
4. Position the other two brackets next to the hose retainer with the larger one
restraining the wire rope.
5. Make sure the braided ground strap is attached under the coverplate mounting screw
head. Attach the strain relief assembly to the coin dial unit, using the new coverplate
mounting screw supplied.
6. Attach the cord stay hook and tighten screw.
7. Connect the 4 handset leads to the terminal board as follows:
Lead Color Terminal Number
Red 15
Green 3
Yellow 8
Black 4
8. Connect LOUD button leads at terminals 2 and 11, making sure that the wire being
connected is routed behind the black line cable.
9. Turn power back ON.
Owner Manual Page 63
To Next Page
Loading...
