Block Devices
You can block a device that is currently connected to your mobile
hotspot. It will be disconnected, and it will not be able to connect
again unless you choose to unblock it. Reasons that you may want
to block a device include:
• Preventing overuse of your bandwidth and possible resulting
overage charges on your plan.
• Temporarily restricting a child's internet access.
You can block devices from the Velocity 2 touch screen or the
AT&T Wi-Fi Manager. To unblock a device, see Unblock Devices on
page 21.
Note: Whenever you block or unblock a device, the Wi-Fi connection
resets to activate the new settings. Any devices that were
connected to the mobile hotspot will need to be reconnected.
On the touch screen:
1. From the home screen, tap Wi-Fi.
2. Tap Connected Devices.
3. To block a listed device from
connecting to your mobile
hotspot, tap the device name.
4. Tap Block.
5. Tap OK. The mobile hotspot will
reset, and the blocked device will
not be able to reconnect to access
the internet.
20
USE YOUR VELOCITY 2
To Next Page
Loading...
