On the AT&T Wi-Fi Manager:
1. Log in, and click Connected Devices in the navigation menu.
2. In the list of connected devices, locate the name of the device
you want to block. Click the Block Access checkbox beside it.
3. Click Apply OK.
Unblock Devices
You can unblock a device that you've previously blocked. This will
allow it to connect to the mobile hotspot again. You can unblock
devices from the Velocity 2 touch screen or the AT&T Wi-Fi Manager.
Note: Whenever you block or unblock a device, the Wi-Fi connection
resets to activate the new settings. Any devices that were
connected to the mobile hotspot will need to be reconnected.
On the touch screen:
1. From the home screen, tap Wi-Fi.
2. Tap Connected Devices.
3. Tap Block List. (You may need to
swipe up to nd it.) A list of blocked
devices appears.
21
USE YOUR VELOCITY 2
To Next Page
Loading...
