This product level is free of charge and available for 3 years following the machine
purchase.
• SMARTLINK Uptime
SMARTLINK Uptime keeps your compressors up and running. By e-mail and/or text, you
receive all relevant machine indications (warnings and shutdowns) in advance. Based on
this information, you can then take all necessary actions and measures to avoid the risk of a
breakdown.
This product level is available as a free of charge 3-month trial.
•
SMARTLINK Energy
SMARTLINK Energy safeguards the performance of your equipment. It enables you to
continuously monitor and analyze the energy efficiency of the compressor room. You decide
which performance indicators, benchmarks and reports are created. You can make accurate
and immediate improvements when needed. The results can be used for energy monitoring
according to ISO50001.
This product level is available as a free of charge 3-month trial.
Once a SMARTLINK level is chosen, gaining access is the next step. To gain access at least one
machine SMARTLINK-ready component (compressor, dryer, ...) is required. Follow the next
steps:
• Gather the information about the SMARTLINK-ready machine(s) (e.g. picture of the data
plate; invoice,…)
• Go to the SMARTLINK web site http://www.atlascopco.com/smartlink
• Click on the left button in the screen below.
• Use the data of the SMARTLINK–ready machine to register as a user.
Instruction book
16 APF221384
To Next Page
Loading...
Need help?
General
