Reference Name
2 Service
3 Automatic operation
4 Voltage on
5 Enter
6 Escape
7 Scroll keys
8 Stop
9 Start
Procedure
Step Action
1 Switch on the voltage. Voltage on LED lights up.
2 Close the condensate drain valves (see the section Cooling and condensate system).
3 Open the air outlet valve.
4 Check the oil level indicator (see the section Oil change). The pointer should be in the
green range or orange range.
5.3 Starting
Warning
The operator must apply all relevant Safety precautions.
Control panel
Elektronikon Graphic controller
Instruction book
APF221384 57
To Next Page
Loading...
