10 Pressure equipment directives
General
This machine is a pressure assembly of category IV according to 2014/68/EU.
Parts of article 4.3 of 2014/68/EU are subject to Sound Engineering Practice (SEP).
Parts of category I according to 2014/68/EU are integrated into the machine and fall under the
exclusion of article 1.2, (f)(i).
Parts subject to the Simple Pressure Vessel Directive 2014/29/EU are excluded from 2014/68/EU
according to article 1.2 (c).
The following pressure bearing parts are subject to 2014/68/EU Pressure Equipment Directive
greater than or equal to category II:
• Oil separator vessel : Cat IV
Design standard : ASME section VIII div. 1.
Material: SA-395, according ASME BPVC section II-A
The design pressure of the vessel is 15 bar(e) (218 psi)
Fatigue is calculated for an infinite lifetime taking into account the dP as mentioned in the
table below
• Safety valve : Cat IV
Design code : AD-Merkblätter, A2
Re-inspection data
Instruction book
APF221384 79
To Next Page
Loading...
