Protection during transport
Transport fixtures
Step Action
1 The coupling housing supports, motor support and air receiver supports are secured to
the frame, immobilizing the vibration dampers during transport.
2 Remove the bushes (1) from the gear casing supports and the motor support.
3 Remove the brackets fitted next to the air receiver supports.
Electric cabinet
Step Action
1 Check that the electrical connections correspond to the local codes. The installation
must be earthed and protected by fuses in all phases. An isolating switch must be fitted.
2 Check the wires on the transformers for correct connection.
3 Check the setting of the circuit breakers (see the section Settings of circuit breakers).
Instruction book
APF221384 55
To Next Page
Loading...
