3.8 Calling up menus
Description
Control panel
When the voltage is switched on, the Main screen is shown automatically.
‘Compr. Outlet’
bar 7.0
rpm 2500
‘Menu’
F1 F2 F3
The arrow down key (1) can be used for a quick look at the actual compressor status.
After pressing the ‘Menu’ (F1) key, the option ‘Status data’ will be followed by a horizontal arrow:
• Either press the tabulator key (2) to select this menu,
• Or use the arrow down key (1) until the desired submenu is followed by a horizontal arrow and then press
the tabulator key (2) to select this menu.
3.9 Quick look at the actual compressor status
Procedure
Control panel
Instruction book
32 2920 1634 04
To Next Page
Loading...
