3.13 Counters menu
Control panel
Function
To call up:
• The loaded hours
• The number of motor starts
• The number of hours the regulator (module) has been under tension
• The accumulated volume
Procedure
Starting from the Main screen (see section Main screen menu):
• Press the key ‘Menu’ (F1).
• Press the arrow down key (1) until ‘Counters’ is followed by a horizontal arrow.
• Press the tabulator key (2) to activate the menu.
• By pressing the arrow key (1), the above-mentioned data can be found.
Calling up the accumulated volume
‘Accumulated vol’
‘1000 m3’ 230
.
‘Menu’ ‘Mod.’
F1 F2 F3
• Consult the procedure above to select ‘Accumulated vol’.
•
In the example above, the display indicates that the compressor has delivered 230 x 1000 m
3
If it should be required to modify the value of the indicated timer, consult Atlas Copco.
Instruction book
38 2920 1634 04
To Next Page
Loading...
