3.23 Service menu
Control panel
Function
• To reset the service plans which are carried out.
• To check when the next service plans are to be carried out.
• To find out which service plans were carried out previously.
Service plans
A number of service operations are grouped (called Level A, Level B, etc...). Each level stands for a number
of service actions to be carried out at the time intervals programmed in the Elektronikon regulator.
When a service plan interval is reached, a message will appear on the screen; see section Status data menu.
After carrying out the service actions related to the indicated levels, the timers must be reset.
Example
Service plans Intervals
Service plan A Every 4000 running hours
Service plan B Every 4000 running hours
Service plan C Every 8000 running hours
Service plan D Every 24000 running hours
Resulting service actions according to At
Service plan A and B 4000 running hours
Service plan A, B and C 8000 running hours
Service plan A and B 12000 running hours
Service plan A, B and C 16000 running hours
Service plan A, B, C and D 24000 running hours
... ...
Procedure
Starting from the Main screen (see Main screen menu):
• Press the key ‘Menu’ (F1).
• Press the arrow down key (1) until ‘Service’ is followed by a horizontal arrow.
• Activate the menu by pressing tabulator key (2).
Instruction book
2920 1634 04 51
To Next Page
Loading...
