Atlas Copco LF 100 - Transport; Transport Wheels; Lifting the Machine

Transport
Transport wheels
1. Unlock the hook (A).
2. Fold the wheels (B) in under the bottom plate to
facilitate manual transport.
B
Lifting the machine
WARNING Lifting hazard
Never lift the machine without checking if it is intact.
A damaged machine can fall apart, which can result
in serious injury.
► Check that all equipment is dimensioned in
accordance with applicable regulations.
► Never walk or stand under a lifted machine.
► Only lift the machine by a hook on the frame.
► Check that the shock absorbers and safety frame
are correctly attached and not damaged.
► Never stand near the machine or forklift truck when
lifting and transporting the machine.
► Check the machine's data plate for weight
information.
Lifting
♦
Always use the machine's safety frame lifting point
(A) to lift the machine.
♦
Lifting equipment must be dimensioned in order
to fulfil all regulations.
♦
Before lifting check that the shock absorbers (B)
and safety frame (C) are correctly attached and
not damaged.
15© 2015 Construction Tools EOOD | No. 9800 1125 01c | 2015-05-26
Original instructions
Safety and operating instructionsLF 100