1. Remove the protective cover (A).
2. Check if the V-belt (B) is damaged, change if
necessary.
3. If the V-belt tension needs adjusting, loosen the
four engine-plate bolts and slide the engine
backwards.
4. Check that the V-belt pulleys are in line, tighten
the screws and reinstall the protective cover (A).
Checking the shock absorbers
1. Check all the shock absorbers (A) for cracks or
if they are exhausted. There are two shock
absorbers (A) on each side of the machine.
2. Change the shock absorbers (A) if they are
damaged.
Checking spark plug, Honda
♦
Check, clean and replace the spark plug.
Every 250 hours of operation
(6 months)
Maintenance routines
Applies to all:
♦
Check and if necessary adjust the engine's valve
clearance.
♦
Clean the engine's cooling flanges.
♦
Check the tightness of all screws and nuts.
♦
Check and lubricate controls and links.
♦
Check all shock absorbers. Replace if necessary.
25© 2015 Construction Tools EOOD | No. 9800 1125 01c | 2015-05-26
Original instructions
Safety and operating instructionsLF 100
To Next Page
Loading...