Atlas Copco LF 100 - Installation; Fuel; Filling

Lifting with forklift truck
♦
Both straps (D) must be used when lifting the
machine with forklift truck (E).
WARNING Transport
During transportation the machine can overturn and
cause serious injury.
► Always strap the machine down.
► Keep your feet away from the machine.
Transporting the machine
1. Secure the machine for all transportation.
2. Place lashing straps (A) in U-shape around the
bottom plate and secure both front and rear.
Installation
Fuel
Filling
WARNING Fuel hazard
The fuel is extremely flammable and fuel fumes can
explode when ignited, causing serious injury or death.
► Protect your skin from contact with the fuel.
► Never remove the filler cap or fill the fuel tank
when the machine is hot.
► Never smoke when filling the fuel tank or when
working with the machine or servicing it.
► Avoid spilling fuel and wipe off any fuel spilled on
the machine.
Filling procedure
1. Stop the engine and let it cool down before filling
the tank.
2. Release the filler cap slowly to let any pressure
escape.
3. Fill the fuel tank to the lower edge of the filler
pipe.
4. Never overfill the tank. Due to the movement of
the fuel within the tank, it is possible to have fuel
at a higher level than the tank cap, which can
lead to a spillage of fuel if the tank cap is opened.
This can be avoided by only opening the tank
cap when the machine is on level ground and
the tank cap is at the fuel tank's highest point.
© 2015 Construction Tools EOOD | No. 9800 1125 01c | 2015-05-26
Original instructions
16
LF 100Safety and operating instructions