Atlas Copco LF 100 - Every 500 Hours of Operation (Yearly); Cleaning the Fuel Tank; Inspection and Adjustment of Engine; Disposal

Applies to Honda engines:
♦
Clean fuel tank and fuel filter. See engine manual
for more information.
Applies to Hatz engines:
♦
Clean and replace the air filter on the engine. See
engine manual for more information.
♦
Check the injection pump. See engine manual for
more information.
♦
Check the fuel injector. See engine manual for
more information.
♦
Change the engine oil. See engine manual for
more information.
♦
Clean the engine's exhaust pipe. See engine
manual for more information.
Every 500 hours of operation
(yearly)
Maintenance routines
Applies to all:
♦
Adjust valve head clearance for intake and exhaust
valves. See engine manual for more information.
♦
Clean and check fuel filter and fuel tank. See
engine manual for more information.
♦
Replace air filter.
♦
Clean the engine's cooling flanges. See engine
manual for more information.
♦
Change oil in the engine. See engine manual for
more information.
Applies to Honda engines:
♦
Clean and adjust the carburettor. See engine
manual for more information.
Applies to Hatz engines:
♦
Check the injection pump. See engine manual for
more information.
♦
Check the injection nozzle. See engine manual
for more information.
♦
Drain the fuel system of water. See engine manual
for more information.
♦
Replace the fuel filter. See engine manual for more
information.
♦
Clean the oil strainer. See engine manual for more
information.
Cleaning the fuel tank
♦
Inspect and clean the fuel tank (A).
Inspection and adjustment of engine
1. Clean and adjust the carburettor (A).
2. Clean engine cooling flanges (B).
3. Adjust the engine's valve (C) clearance.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in accordance with local restrictions.
Before a fuel driven machine is deposited it must be
emptied and cleaned of all oil and fuel. Remaining
oil and fuel must be dealt with in a way that does not
adversely affect the environment.
Always send used filters, drained oil and fuel
remnants to environmentally correct disposal.
© 2015 Construction Tools EOOD | No. 9800 1125 01c | 2015-05-26
Original instructions
26
LF 100Safety and operating instructions