4. Turn the start switch (D) to ON.
5. Grip the handle of the recoil starter (E) and pull
until resistance is felt. Release the handle to the
initial position, then pull until the engine starts.
6. Move the choke valve (F) gradually to the fully
open position.
7. Allow the engine to idle a few minutes before
increasing to full power (G).
Stopping the engine, Honda
1. Move the throttle control to idling position (A).
Let the engine idle for a few minutes.
2. Turn the start switch (B) to OFF.
3. Close the fuel cock (C).
Hatz
Before starting, Hatz
Follow the general safety precautions supplied with
the machine at delivery. We recommend that you
study the engine manual supplied with the machine.
Check that maintenance routines have been carried
out.
19© 2015 Construction Tools EOOD | No. 9800 1125 01c | 2015-05-26
Original instructions
Safety and operating instructionsLF 100
To Next Page
Loading...