♦
Clean and replace the air filter (B) if necessary.
Checking the engine, Hatz
1. Check the oil level on the dipstick.
2. Check the fuel level (A).
3. Check the engine for oil leaks.
4. Clean and refit the air filter (B) if needed.
After the first 20 hours of
operation
Maintenance routines
Applies to all:
♦
Change engine oil.
♦
Clean and refit air filter.
♦
Check the engine speed.
Applies to Hatz engine:
♦
Check and adjust valve clearance. See engine
manual for more information.
Changing the engine oil, Honda
1. Unscrew the drainage plug (A).
2. Tilt the machine backwards and let the oil drain
in a drainage hose.
3. Clean around the hole (B) where the drainage
plug (A) was placed.
4. Refit the drainage plug (A).
5. Unscrew the dipstick (D).
23© 2015 Construction Tools EOOD | No. 9800 1125 01c | 2015-05-26
Original instructions
Safety and operating instructionsLF 100
To Next Page
Loading...