- 56 -
Notes:
1. More frequently when operating in a dusty environment.
2. Refer to the engine operation manual.
3. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
4. Use Atlas Copco oil filters, with by-pass valve, as specified in the parts list.
5. Gummed or clogged filters mean fuel starvation and reduced engine performance.
6. See section Oil specifications.
7. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing
point:
2913 0028 00 Refractometer
2913 0029 00 pH meter.
8. See section Safety valve.
9. Replace all rubber flexibles every 6 years, according to DIN 20066.
Keep the bolts of the housing, the lifting beam, tow bar and axles
securely tightened. For torque values see section Technical
specifications.