- 31 -
STOPPING
After pressing the STOP button the display will show:
After a Stop command, or in case of a controlled stop
alarm, the machine will cool down and run at minimum
rpm for 1 minute before it will stop.
After cooling down the engine will stop and the display
will show
The engine is stopped, and the controller will do a double
check to see if the engine is really stopped.
Active Buttons
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
Active Buttons
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
To Next Page
Loading...
