- 41 -
Maintenance
Use of Service Paks
Service Paks include all genuine parts needed for normal
maintenance of both compressor and engine. Service Paks
minimize downtime and keep your maintenance budget
low. You may order Service Paks from your local Atlas
Copco dealer.
Preventive Maintenance Schedule For
The Compressor
The schedule contains a summary of the maintenance
instructions.
Read the respective section before taking maintenance
measures.
When servicing, replace all disengaged packings, e.g.
gaskets, 0-rings, washers.
For engine maintenance refer to Engine Operation
Manual.
The maintenance schedule has to be seen as a guideline for
units operating in a duty environment typical to
compressor applications. Maintenance schedule can be
adapted depending on application environment and
quality of maintenance
Maintenance Table Sections
And Sequences
Maintenance Schedule Daily Initial 50hours +
Every 250/750
hours
Every 500 hours Every 1000 hours Note
Service Kits : 1310 9230 03 1310 9230 04 1310 9230 05
Daily Operational Checks
Check Fuel Level Check
Check Compressor Oil Level Check
Check Coolant Level Check
Check Fan Belt Check
Fuel Filter Water Drain Empty
Air Filter Dust Valve Empty
Air Intake Vacuum Indicator Check
Air Intake Hose Check
Flexible Hoses Check
Check Tire Pressure Check
Electrolyte Level And Terminals Of Battery Check Check Check
Roading Equipment Checks
Jack Stand Check
Torque Wheel Nuts Check Check Check
Inspect Tires for Cuts or Damage Check
Service Wheel Bearings Inspect
Safety Chains Check Check
Safety Decals Condition Check Check
Safety Equipment Checks
Inspect Safety Valve Operation Check
Inspect Shutdown switch operation Check
Leaks in Air, Oil or Fuel System Check Check Check
To Next Page
Loading...
