- 68 -
DESIGN DATA
Compressor element
Engine
Designation All units
Number of compression stages 1
Designation XAS 400 JD7
IT4
XATS 400 JD7
IT4
XAVS 400 JD7
IT4
Make John Deere John Deere John Deere
Type 4045HFC92 4045HFC93 4045HFC93
Coolant Ethylene glycol
mix w/SCA
package
Ethylene glycol
mix w/SCA
package
Ethylene glycol
mix w/SCA
package
Number of cylinders 4 4 4
Bore mm 105 105 105
in 4.13 4.13 4.13
Stroke mm 127 127 127
in 5 5 5
Swept volume l 4.4 4.4 4.4
cu.in 269 269 269
Output acc. to SAE J1995
at normal shaft speed
kW 85.75 93.21 115.58
hp 115 125 155
- Load factor % 75 75 75
Designation All units
Capacity of oil sump
- Initial fill L 6.9
qts 7.3
- Refil (max.) L
US gal
Capacity of cooling system L 17.98
qts 19
Compressor
1)
Air required for engine and compressor element cooling, for combustion and for
compression.
Compressor dimensions with Undercarriage
Designation All units
Capacity of compressor oil system l 23.66
US gal 5, 7
Net capacity of air receiver l 41.64
US gal 11
Capacity of fuel tank l 219.5
US gal 58
Air volume at inlet grating (approx.)
1)
m
3
/s 6.8
cuft/s 240
Designation All units
Length mm X
in X
Width mm X
in X
Height mm X
in X
Weight (ready-to-operate) See indication on dataplate
To Next Page
Loading...
