EasyManua.ls Logo

Atlas Copco XAS 400 JD IT4 HOP

Atlas Copco XAS 400 JD IT4 HOP
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 29 -
XC2002™ MENU OVERVIEW
At Xc2002™, the LCD will show the following
information through the display views:
1. in Normal condition (scroll through the information
using UP and DOWN):
- Controller type & version
This view shows the controller type and the software
version number.
- Fuel level
This view shows the fuel level (in %) and the running
hours.
- Vessel pressure
This view shows the vessel pressure and the running
hours.
See also "Parameter list" on page 30 for selection between
metric (bar) or imperial (psi) units
- Engine RPM
This view shows the engine running speed (in RPM) and
the running hours.
- Fuel pressure
This view shows the fuel pressure and the running hours.
See also "Parameter list" on page 30 for selection between
metric (bar) or imperial (psi) units.
- Fuel consumption
This view shows the engine fuel consumption and the
running hours.
See also "Parameter list" on page 30 for selection between
metric (L/h) or imperial (Gal/h) units.
- Alarm list
- contains a list of active alarms
This view shows the number of active alarms and gives
access to them.
An overview is given in "Alarm Display (pop up
window)" on page 33.
- Extra views display
This view shows the extra views available in the
controller.
- Regulating pressure
This view shows the regulating pressure and the running
hours.
See also "Parameter list" on page 30 for selection between
metric (bar) or imperial (psi) units.
- Coolant temperature
This view shows the engine coolant temperature and the
running hours.
See also "Parameter list" on page 30 for selection between
metric (°C) or imperial (°F) units.
- Oil pressure
This view shows the engine oil pressure and the running
hours.
See also "Parameter list" on page 30 for selection between
metric (bar) or imperial (psi) units.
- Unit Type
This view shows the model type of the compressor.
1 = default unit type
It is possible to scroll between configuration menu's by
using the pushbuttons UP and DOWN.
Xc2002
1.40.0
Fuel 12%
00000.h
Vessel 2.1bar
00000.h
RPM 0
00000.h
E|C Fuel
pressure
00000.h
--bar
E|C Fuel
rate
00000.h
--L/h
Alarm list
0 Alarm(s)
Extra Views
RegP 0.37bar
00000.h
Temp 0°C
00000.h
Oil --bar
00000.h
Unit Type
1 1 10

Table of Contents

Related product manuals