atmosphere 101076 - Installing the Filters

5
Fig. 4
Fig. 7
4. Pull on the side tabs to remove the pre-fi lter from the HEPA fi lter
(Fig. 4).
5. Remove the odour fi lter by pulling straight out (Fig. 5).
Installing the Filters
1. Remove the odour fi lter from its plastic bag (Fig. 6) and carefully replace
the fi lter all the way back inside the air purifi er (Fig. 7).
Note: Carbon dust from the odour fi lter may stick to the bag during shipping. When
handling the odour fi lter and its packaging, be very careful that carbon dust
does not stain your clothes, furniture, or carpet.
Fig. 6
Fig. 5