7
Operating Instructions
Getting Power
Put unit plug into socket on base of Air Purifi er (Fig. 12).
Operating Modes
Your air purifi er has four modes of operation, controlled by fi ve buttons on
the control panel. Two modes provide continuous operation, and two provide
timed periods of operation. The four modes are described in Operating Modes
table; the functions of the fi ve buttons are summarized in Control Panel
Functions table.
OPERATING MODES TABLE
NOTE: For maximum air cleaning effectiveness, continuous operation is recommended.
A timed operation is selected when you want the air purifi er to operate for
a set amount of time at a specifi ed speed.
CONTINUOUS OPERATION
MANUAL
Mode
Provides continuous operation until you turn air purifi er
off or change to another mode. Fan speed remains the
same until you change it manually.
AUTO
Mode
Provides continuous operation until you turn air purifi er
off or change to another mode. Fan speed automatically
changes in response to input from the particle sensor: the
dirtier the air, the higher the fan speed.
TIMER
Mode
Operates for a specifi ed time period, which you select, at
a fan speed you select. At the end of the selected time
(from ½ – 12 hours), air purifi er turns off.
TURBO
Mode
Provides a burst of cleaning power. Air purifi er operates
at highest speed (turbo) for 30 minutes, then turns off or
returns to the previous mode and speed.
TIMED OPERATION
Fig. 12
To Next Page
Loading...
