Need help?Do you have a question about the Atom 3 Series and is the answer not in the manual?
Instructions for correctly assembling the magnetic rod and mobile platform.
Steps for correctly mounting the filament spool onto the printer using provided hardware.
Detailed steps for attaching and positioning the printer's antenna for optimal signal.
Guidance on connecting the power supply and powering on the 3D printer.
Procedure to calibrate the print bed for optimal first layer adhesion and print quality.
Connecting the auto-leveling sensor to the printer's platform cable.
Navigating the printer's LCD menu to initiate the auto-leveling process.
Instructions on how to properly clean the build plate for best print adhesion.
Step-by-step guide for safely removing and installing different hotends.
Initial steps for hotend replacement, including filament removal and cooling.
Navigating the printer's interface to upload print job files.
Selecting a file from the uploaded list and initiating the print job.
Adjusting Z-axis settings for first layer adhesion issues.
General| Brand | Atom |
|---|---|
| Model | 3 Series |
| Category | 3D Printers |
| Language | English |
To Next Page
