Atom HSP588 - Optional Accessories; Recommended Spare Parts

HSP588
Use and maintenance manual pag. 11
1.6 Optionals accessories
The machine can be equipped with the following optional accessories:
- material feeding devices: AL81 - AL82 - AL85 - AL86
- PR roll-holders (versions with 4-8-12 rolls)
- simple cut-counting device
- programmed cut-counting device
- magneto-thermal switch (pump and travelling head motors)
- shock absorbers
- set of wheels for machine displacement.
1.7 Recommended spare parts
On completion we also advise the following list of spare parts (according to decreasing priority):
- no. 2 cutting pushbuttons micro-interrupter s (code 02000310)
- no. 2 travelling head stroke-end micro-interrupter s (codes: 02000313+02000698)
- no. 2 travelling head displacement m micro-interrupters (code 02002346)
- no. 2 pushbuttons covers (code 02000051)
- no.1 set of printed circuit cards (codes: 02003100+03E02241)
- no.1 travelling head return potentiometer (code 02001422)
- no.1 insert for joint (code 01002010)
- no.1 electromagnet (code 02Z01746)
- no.1 outside horizontal flex. pipe (for HSP 588/1/2/3: code 02002300)
(for HSP 588/5: code 02002357)
- no.1 flex. pipe tank-flow regulator connection (code 02003063)
cod. 02003095; per HSP 588/2/3/5: cod. 02003062)
- no.1 flex. pipe flow regulator - delivery pipe connection
(for HSP 588/1: code 02003095;
for HSP 588/2/3/5: code 02003062)
- no.1 tank flex. pipe (code 02003110)
- no.1 set of piston seals (for HSP 588/1/2: codes: 02002294+02002293+02002292)
(for HSP 588/3/5: codes 02001942+02001941+02001940)
- no.1 gear pump (for 50 Hz motor: code 02003066)
(for 60 Hz motor: code 02003083)
- no.1 travelling head motor remote control reverse (code 02E03865)
- no.4 travelling head springs (for HSP 588/1/2: code 01010680)
(for HSP 588/3/5: code 01010681)
- no.1 electro-valve (code 02003048)
- no.1 oil filter (code 01003863)
and the following wear material:
- no.1 cutting board (for HSP 588/1: code 02003098)
(for HSP 588/2/3: code 02000738)
(for HSP 588/5: code 02000739)
- no.1 striking plate (for HSP 588/1: code 01010679)
(for HSP 588/2/3/5: code 01003584)
- no.12 screws (for HSP 588/1: code 02000585)
(for HSP 588/2/3/5: code 02002145)
- no.12 washers (code 02000338)
- no.12 nuts (code 02000148)