Atom HSP588 - AL 81-82 Wiring Diagram Nomenclature

HSP588
Use and maintenance manual pag. 39
DL8) right trolley displacement output led: this led lights up when the printed circuit card feeds the
remote control reverser coil (N.5) for trolley displacement to right;
DL9) left trolley displacement output led: this led lights up when the printed circuit card feeds the
remote control reverser coil (N.5) for trolley displacement to left;
DL10) cutting electro-valve output led: its lighting up indicates the feeding of the electro-valve coil
(N.26);
DL11) cutting stroke-end positioning electro-valve output led: this led has to light up when the printed
circuit card feeds the cutting stroke-end positioning electro-valve coil (N. 25) with the selector (N.14) on
ADJUSTMENT position;
DL12) cutting stroke-end signal led: this led has to light up when the striking plate reaches the stroke-end
position;
DL13) ADJUSTMENT-AUTOMATIC switch led: this led lights up when the selector (N.14) is on
ADJUSTMENT position.
5.3 AL 81-82 Wiring diagram nomenclature
No.
Code
Part description
1
02002287
Remote cont
rol reverser for material feeding in/back motor
2
02002448
02002449
1/1.6A
-
380/440V therm
al
relay for material feeding in/back motor
(optional)
1.6/2.5A - 220/240V thermal relay for material feeding in/back motor
(optional)
3
02001346
02001347
02001348
02001349
02001350
02001351
220/380V 50Hz material feeding in/back motor
260/450V 50Hz material feeding in/back motor
240/420V 50Hz material feeding in/back motor
220/380V 60Hz material feeding in/back motor
250/440V 60Hz material feeding in/back motor
3
20/550V 60Hz material feeding in/back motor
4
02001357
Foot tr
e
adle for material feeding in
5
02001385
Feeder plug
6
02002287
Remote control reverser for rolls opening/closing motor
7
02002448
02002449
1/1.6A
-
380/440V therm
al
relay for rolls opening
/closing motor (optional)
1.6/2.5A
-
220/240V therm
al
relay for rolls opening/closing motor (optional)
8
02001346
02001347
02001348
02001349
02001350
02001351
220/380V 50Hz rolls opening/closing motor
260/450V 50Hz rolls opening/closing motor
240/420V 50Hz rolls opening/closing motor
220/380V 60Hz rolls opening/closing motor
250/440V 60Hz rolls opening/closing motor
320/550V 60Hz rolls opening/closing motor
9
01010162
Feeder tap
10
02001341
Rolls opening stroke
-
end
micro
-
interrupter
11
02001341
Rolls c
losing stroke
-
end
micro
-
interrupter
12
02001423
Rolls opening/closing swicth
13
02001423
Rolls opening/closing swicth