HSP588
Use and maintenance manual pag. 20
f) the hydraulic oil must have the following chemical-physical features (ISO 46, 3.5° - 4° Engler a 50°
C):
- SHELL Tellus 46;
- ESSO Nuto H 46;
- TOTAL Azolla 46;
- AGIP Oso 46.
g) IMPORTANT: replacement of the micro-interrupter for control push-button (code 02000310)
Respect the safety measure stated between the push-button upper side and the handle edge, as shown in
the picture (table. 3).
h) replace the oil of the travelling head translation device (code 03000761, table. 5) every 6000
working hours with one of equal to EP 460 (Kg. 0.400).
~ 2 mm.: IMPORTANT
01002059
01002057
01000968
02000310
Fig. 4
To Next Page
Loading...